Saramonic Blink500 Pro B2 Advanced Wireless Dual Microphone.

The Saramonic Blink 500 ProX B2 is a true-wireless, digital microphone system that offers a complete, cost-effective solution for recording clear-sounding dialog, interviews, and speech with two people talking simultaneously directly to a mirrorless/DSLR camera, recorder, mixer, or other 3.5mm-input devices. The Blink 500 ProX is the next generation of the popular Blink 500 Pro system. It serves up some notable improvements, including higher digital audio quality, smaller and lighter, updated design, lower latency/voice delay, more wireless reliability, upgraded OLED displays with real-time metering, longer battery life, and more.

The Blink 500 ProX B2 consists of two compact clip-on transmitters, each with its own built-in omnidirectional microphone, allowing you to quickly attach them to subjects for fast, run-and-gun-style shoots. For a more discreet look, you can plug the two included Omni Lavalier microphones with windshields into the transmitters' 3.5mm input jacks. The tiny two-channel receiver features a 3.5mm output connection for camera use and a headphone jack to monitor your audio in real-time. Camera mounting is made easy by the receiver's clip, which easily attaches to your camera shoe. The system provides out-of-the-box operability for anyone (thanks to quick, one-click pairing) and delivers reliable transmission with a clear sound at a distance of up to 328'. Built-in rechargeable batteries provide up to 10 hours of operation on the transmitters and receiver. Recharging the batteries can be done via USB or by simply dropping the transmitters and receiver into the supplied fast-charging case.

Specifications:

Transmitters:

Reception Type: 2.4GHz Digital Frequency
RF Frequency Band: 2400 to 2483.5 MHz
Modulation: Gaussian Frequency-Shift Keying (GFSK)
Operating Range: Up to 328' (100m)
RF Output Power: 10mW
Built-in Microphone Polar Pattern: Omnidirectional
Frequency Response 50Hz to 18KHz
Built-in Microphone Maximum SPL: 120dB
Built-in Microphone Sensitivity: -39dB
Lavalier Microphone Maximum SPL: 110dB
Lavalier Microphone Sensitivity: -39dB
Reference Audio Input Level: -30~-42dBv MIC input, 0dB Attenuation
Input Connector: 3.5mm Mic In / Line In (Mic with Plug-in-Power)
Digital Signal Resolution: 24bit / 44.1kHz
Signal-to-Noise Ratio: ≥78dB
Voice Delay: ≤6ms
Distortion: ≤0.05%
Power Requirements: Built-in Li-ion Battery, Micro USB DC 5V or Charging Contact
Battery Life: Approximately 8-hours
Antenna: PIFA Antenna
High-contrast OLED Screen Resolution: 128 X 64 pixels
Other Functions: Tactile Mute Function
Weight: 1.13oz (32g)
Dimensions: 2.22 x 1.5 x 1.03” (56.5 × 38 × 26.1mm)
Operating Temperatures: 0° to 122°F (0°C to 50°C)
Storage Temperatures: -4° to 131°F (–20°C to +55°C)

SR-M1 Lavaliers Specifications:

Acoustic Principle: Electret Condenser
Polar Pattern: Omnidirectional
Connector: 3.5mm
Cable Length: 4.1’ (1.25m)
Maximum SPL: 110dB
Sensitivity: -39dB+/-2dB(0dB=1V/Pa,1kHz)
Signal-to-Noise Ratio: ≥60dB
THD: <1% (94dB SPL at 1kHz)
Power Requirements: Plug-in-Power (1V～10V)
Standard Operating Voltage: 3V
Current Consumption: <500μA
Output Impedance: <2.2KΩ

Receiver Specifications:

Reception Type: 2.4GHz Digital Frequency
RF Frequency Band: 2400 to 2483.5 MHz
Modulation: Gaussian Frequency-Shift Keying (GFSK)
Operating Range: Up to 328' (100m)
Line Output Connector: 3.5mm
Output Level: -60dBV to -20dBV
Output Mode Types: Mono / Stereo
Digital Signal Resolution: 24bit / 44.1kHz
Signal-to-Noise Ratio: ≥78dB
Voice Delay: ≤6ms
Distortion: ≤0.05%
Headphone Output Connector: 3.5mm
Power Requirements: Built-in Li-ion Battery, Micro USB DC 5V or Charging Contact
Battery Life: Approximately 8-hours
Antenna: PIFA Antenna
High-contrast OLED Screen Resolution: 128 X 64 pixels
Weight: 1.13oz (32g)

Saramonic Blink500 Pro B2 Advanced Wireless Dual Microphone

Saramonic Blink500 Pro B2 Advanced Wireless Dual Microphone

In Stock

Brand

32,500৳ 45,000৳

Subscribe to our Newsletter