BOYA BY-M1LV-U 2.4GHz Wireless Microphone for Android.

The BOYA BY-M1LV-U Wireless Microphone operates at 2.4GHz. The BOYA BY-M1LV wireless microphone is designed for mobile devices and is exceptionally lightweight, ultra-compact, and simple to use. It offers detailed, outstanding sound. There are two distinct receivers in this series. The BY-M1LV-D receiver is designed for Apple iOS devices and has an MFi Certified Lightning output. The USB-C output of the BY-M1LV-U receiver makes it compatible with Android smartphones, tablets, and other devices that have USB-C connectors.

The clip-on transmitter BY-M1LV-TX catches crystal clear sound from all directions thanks to its built-in omnidirectional mic. Users may alter pronunciation at any point while recording and adjust tone, pace, and intonation in real-time, thanks to the groundbreaking two-way audio technology with ear return monitoring. You have total control over your sound with gain control, headphone volume control, and a mute option. A full charge may give 6 hours of battery life, allowing you to produce content without worrying about running out of power. The BOYA BY-M1LV system is an excellent choice for live streaming, multimedia production, mobile journalism, and other applications.

Specifications:

BY-M1LV-TX

Transmission Type	2.4GHz
Modulation	GFSK
Operating Range	Up to 328′ (100m) (without obstacles)
RF Output Power	-3.190dBm
Microphone Polar Pattern	Built-in Microphone: Omnidirectional
Frequency Response	50Hz-8.5KHz
SNR	> 70dB
Maximum SPL	Built-in Microphone: 110dB SPL
Sensitivity	Built-in Microphone: -39dB±2dB
	(0dB=1V/Pa@1kHz)
Power Requirement	Built-in Li-ion Battery or USB-C DC 5V
Antenna	PIFA Antenna
Battery Life	Approx. 6 hours
Audio Output	3.5mm Jack
Weight	Approx. 18g
Dimensions	40×38.2×14mm
Operating Temperature	-10°C to 50°C
Storage Temperature	–20°C to 55°C

BY-M1LV-U-RX

Transmission Type	2.4GHz
Modulation	GFSK
Operating Range	Up to 328′ (100m) (without obstacles)
RF Output Power	2.014dBm
Audio Output	USB-C Connector
Power Requirements	Supplied by USB-C Devices
Antenna	PIFA Antenna
Noise Reduction	Yes
Weight	Approx. 10g
Dimensions	23×38.2×14mm
Operating Temperature	-10°C to 50°C
Storage Temperature	–20°C to 55°C

Features:

Custom Omnidirectional Capsule For High-Quality Audio Pickup.

Designed with a custom omnidirectional signal capsule, it captures broadcast-quality sound from a 360-degree range and delivers it to your recording device via its 6m(20’) shielded cable. With the improved sensitivity, signal-to-noise, and flat frequency response, BY-M1 allows you to record every last audio detail with lower self-noise.

Two Recording Modes For Different Using Scenarios.

Featuring a 3.5mm 4-pole TRRS output connector, you can connect BY-M1 to your camera or camcorder under “camera” mode, and also connect it to your smartphone or PC when switching to “OFF/Smartphone mode.

Every Necessary Accessory Is Included.

In terms of accessories, you will find a lapel clip, and foam windscreen all in the pack, an LR44 battery for using “camera” mode, a 1/4" audio adapter for the compatible further device, and a carrying pouch to provide secure protection.

Using the microphone:

• For smartphones.

Switch off the microphone. Slide the ON/OFF up to OFF/Smartphone.

The power is shut down.

• For DSLR, Camcorders, Audio recorders, PC, etc.

Switch on the microphone. Slide the ON/OFF up to ON.

Notes: Due to the 2.4GHz wireless frequency, a signal can be easily attenuated. Please try to avoid obstacles, such as walls and buildings, and avoid proximity to devices with 2.4GHz signals, such as high-power wifi antennas, smartphones with wifi in use, radios, etc.

How to use:

Press and hold the power button for 3 seconds to turn on the transmitter.
Plug the BY-M1LV-D-RX into an iOS device or the BY-M1LV-U-RX into a USB-C device.
Transmitter and receiver pairing
Before leaving the factory, the system is pre-paired. Therefore, the connection will be established once they are powered on. If they are disconnected, please follow the steps below:
① Double-click the power button of the transmitter. The indicator flashes blue and red alternately.
② When the transmitter indicator flashes blue and red alternately, insert the supplied pairing pin into the small pinhole on the receiver. The indicator of the receiver flashes blue rapidly.
③ Transmitter and receiver will be paired within 10 seconds. Indicators of both will flash blue slowly.
You are ready to record.

Package Content:

1 × BY-M1LV-TX Transmitter
1 × BY-M1LV-U-RX Receiver
1 × USB-C Charging Cable
1 × Fur Windshield
1 × Pairing Pin
1 x User Manual.

BOYA BY-M1LV-U 2.4GHz Wireless Microphone for Android

BOYA BY-M1LV-U 2.4GHz Wireless Microphone for Android

In Stock

Brand

7,950৳ 8,800৳

Subscribe to our Newsletter